|
Professional 750W powered mixing
console with advanced mixing facilities
and
built in 24BIT DSP Effects.
Powered mixing with pro features...
The
new Kam KMD10 is a powered mixing console with class. Cast an
experienced eye over the specifications for this unit and it becomes
apparent that there are a heap of little extras and professional features
here
that are normally restricted to far more expensive products. You could
start
with the excellent mic pre amps & low noise high gain circuitry... or
the
Mute system that routes to a set of Alt3&4 outputs instead of just
cutting the channel so you can set up a sub mix... or the 32 different
20BIT
Effects... or the insert connections on the Channel Inputs, Aux, Alt
and
Master outputs... or the comprehensive Control Room monitoring
system. You could start anywhere and there would still be a very long list of
things
like four band ‘line channel’ EQ and swept mid 3 band ‘mic channel’
EQ...
and we wouldn’t even have started on the build quality, the protective
control cover, the independant power supllies for the amplifier & mixer and
external amplifier input.
Channel section
6
mono input channels with;
Gold
plate XLR mic inputs
48V
phantom power
Balanced jack line inputs
TRS
inserts
Gain
controls
75Hz
cut switch
Swept
mid 3 band EQ
4
stereo line input channels with;
Balanced jack inputs
Channel Strips
Four
band EQ
All
input channels feature;
Aux 1
send (pre or post switch)
Internal FX/Aux 2 send
Balance control
PFL/Solo
button (dual action)
Mute/Alt 3&4 (mutes & routes)
60mm
faders
Master section
7 band
graphic EQ (+/-10dB)
Graphic EQ on/off
Rotary
aux 1 & 2 send controls
Aux
1&2 PFL buttons
60mm
fader aux 1 & 2 returns
Alt
3&4 1/4" jack outputs
Alt
3&4 TRS inserts
Dedicated Alt 3&4 level fader
Alt
3&4 PFL
RCA
phono 2 track in & out
Balanced XLR out (+4dBu/-10dBV switch)
Unbalanced 1/4" jack master out
Master
TRS inserts
1/4"
jack Control Room (CR) out
Comprehensive CR out routing
CR out
rotary level control
PFL or
solo in place selector
Headphone out
12
point LED level meter
DSP
digital effects system
24Bit
stereo processing
32
effect types
46kHz
20BIT A/D D/A
DSP FX
direct In
Amplifier Section
Separate amplifier level controls
1/4"
jack amplifier direct inputs.S p e
2 x
375W RMS into 4 Ohm
Speakon out
Binding post out
Separate power on/off amp & mixer
Channel EQ +/-15dB
Low
noise circuitry
Low
noise gain structure
Carrying handle
Protective rigid control cover
19"
rack ears included
Frequency Range 10Hz~60KHz
THD
0.01% @ +4dbU/1KHz
S/N
Ratio 77dB
Dimensions 535W x 410D x 185H (mm)
Weight
18.5kg
www.kam.co.uk
|
POWERED MIXER KDM 10 (750W)